MB Quart MBQX-STG5-1 800 Watt STAGE 5 Can-Am X3 Tuned System

MB Quart MBQX-STG5-1 800 Watt STAGE 5 Can-Am X3 Tuned System

Can-Am's Maverick X3 is a high-performance side-by-side with plenty of power, and MB Quart's Stage 5 kit is the ultimate Maverick system. With a marine digital media receiver, front and rear 6-1/2" marine speakers, a 4-channel amp, a mono sub amp, and a 10" subwoofer, this system will add some serious thump to your off-road adventures.

MB Quart designed this package to fit right into your Maverick, with no cutting and minimal hassle. It also comes with all the parts and pieces needed for a smooth, hassle-free installation. Each component is tough enough for trail duty, so you won't have to worry about your system getting swamped.

Product highlights:

• marine digital media receiver (does not play CDs)
• system also includes:
• 4 speakers, 10" subwoofer, 4-channel amp, mono amp
• speaker and sub enclosures, dash kit, amp brackets, installation parts and wiring
• compatible with Smart-Lok

MB Quart GMR-LED marine digital media receiver (does not play CDs)

• built-in amplifier (20 watts RMS/40 peak x 4 channels)
• built-in Bluetooth connectivity
• works with Apple and Android smartphones
• global AM/FM/Weather tuner
• inputs: AUX in, USB port, video/camera input
• outputs: 6-channel preamp outs (4-volt front, rear, sub), video out
• independent subwoofer level control with selectable low pass filter
• warranty: 1 year

MB Quart NP1-116 6-1/2" Nautic marine speakers (2 dash and 2 cage-mount)

• power handling up to 60 watts RMS (120 watts peak)
• designed to marine and off-road use
• 1" titanium dome tweeters
• Santoprene rubber surrounds
• warranty: 1 year

MB Quart MBQX-SUB-2 10" marine subwoofer

• handles up to 400 watts peak power
• enclosure mounts under front seat
• dual voice coils
• IP67-rated
• warranty: 1 year

MB Quart TM400X4AD 4-channel amp

• Class D design
• 100 watts RMS x 4 at 4 ohms (400 watts peak)
• frequency response: 20-20,000 Hz
• low-pass crossover and bass boost
• conformal-coated circuit board — suitable for power sports and marine applications
• warranty: 1 year

MB Quart NA2-400.1 mono subwoofer amp

• Class D design
• frequency response: 10-300 Hz
• power specs: 200 watts x 2 at 4 ohms (400 watts x 1 at 2 ohms)
• electronic crossover
• warranty: 1 year
• MFR # MBQX-STG5-1

What's in the box:

• This package contains 7 individually boxed items along with a QR Code for installation instructions:

GMR-LED&X3 Dash Kit:

• Marine digital media receiver w/ inline 10A & 1A fuses
• Wiring harness
• Mounting bracket (pre-installed on radio)
• 2 Threaded studs/posts (pre-installed)
• 4 Nuts (pre-installed)
• 2 Lock-washers (pre-installed)
• 2 Front-covers (pre-installed)
• Four 1-1/4" Screws
• 2 Nuts
• Operator's Guide

MBQX-POD-1:

• Two NP1-116 6.5" coaxial speakers pre-mounted into left and right side mounting panels

NPT1-116B:

• 2 Pod-mounted 6.5" coaxial speakers w/ attached upper mounting clamp and 7" bare ended speaker wire
• 2 Lower mounting clamps
• Two 1.875" rubber spacers
• Two 1.75" rubber spacers
• 2 After-market roll-cage rubber spacers
• Eight 25mm hex-socket bolts
• 2 Large "MB Quart" adhesive emblems
• 2 Small "MB Quart" adhesive emblems

NA2-400.2 Amplifier:

• 2-Channel amplifier w/ attached 8" power/ground and speaker output harnesses (terminated with Molex plugs)
• 16" Power/ground harness (inline 30A ATC fuse)
• 16" Speaker output harness
• Four 18mm screws
• Quickstart guide

NA2-400.1:

• Mono amplifier (attached 7" 3-pin & 2-pin harnesses)
• 16" Power/ground harness (inline 30A ATC fuse)
• 16" 2-Pin speaker harness
• Four 3/4" screws
• 4 Flat-washers
• 4 Lock-washers
• Remote level control (attached 15.5' cable w/ Molex connector)
• Amplifier installation guide

MBQX-SUB-2:

• Loaded 10" subwoofer enclosure w/ attached 20" wire harness
• 2 Mounting brackets
• Three 6-1/2" strips of foam padding (3M adhesive backing)
• Two 2" aluminum spacers
• One 1/2" plastic spacer
• Six 3/4" bolts
• Two 1" Torx screws (T-30)
• 2 Nylock nuts
• 2 Large flat-washers
• 12 Small flat-washers
• 6 Lock-washers

MBQX-ACC-1:

• Amplifier mounting plate
• 7.5' Power harness (inline 70A Maxi fuse)
• 5' Speaker output splitter harness
• 7.5' Right rear speaker harness
• 7.5' Left rear speaker harness
• 32" 4-Seat extension harness
• 6' Subwoofer harness
• Two 3' stereo RCA cables
• One 12" RCA cable
• Two 8.5" RCA splitters (1 male to 2 female ends)
• Two 4.5" LED jumper/splitters
• Ten 7" wire ties
• Eleven 12mm screws
• 8 Flat-washers
• 8 Nylock nuts