MB Quart MBQR-STG5-2 Stage 5 Audio System For Polaris RZR 14-Up Receiver, Four 8" Speakers, 2-Channel Amp, 10" Sub & Mono Amp

MB Quart MBQR-STG5-2 Stage 5 Audio System For Polaris RZR 14-Up Receiver, Four 8" Speakers, 2-Channel Amp, 10" Sub & Mono Amp

Your Polaris RZR is a high-performance side-by-side with plenty of power, and MB Quart's Stage 5 kit is the ultimate MB Quart RZR system. With a marine digital media receiver, front and rear 8" all-weather speakers, a 2-channel amp, a mono sub amp, and a 10" subwoofer, this system will add some serious thump to your off-road adventures.

MB Quart designed this package to fit right into your RZR, with no cutting and minimal hassle. It also comes with all the parts and pieces needed for a smooth, hassle-free installation. Each component is tough enough for trail duty, so you won't have to worry about your system getting swamped.

Product highlights:

• marine digital media receiver (does not play CDs)
• system also includes:
• 4 speakers, 10" subwoofer, 2-channel amp, mono amp
• dash-mount panel with USB and aux inputs
• speaker and sub enclosures, dash kit, amp brackets, installation parts and wiring

MB Quart GMR-LED marine digital media receiver (does not play CDs)

• built-in amplifier (20 watts RMS/40 peak x 4 channels)
• built-in Bluetooth connectivity
• USB port works with Apple smartphones
• global AM/FM/Weather tuner
• inputs: AUX in, USB port, video/camera input
• outputs: 6-channel preamp outs (4-volt front, rear, sub), video out
• independent subwoofer level control with selectable low pass filter
• warranty: 1 year

MB Quart 8" marine speakers (2 dash and 2 cage-mount)

• compression horn design for outstanding volume
• power handling up to 90 watts RMS (180 watts peak)
• designed to marine and off-road use
• 1" titanium compression diaphragm tweeter
• Santoprene rubber surround
• impedance: 4 ohms
• warranty: 1 year

MB Quart 10" marine subwoofer

• handles up to 400 watts peak power
• RZR-specific enclosure replaces glovebox
• dual voice coils
• IP67-rated
• warranty: 1 year

MB Quart NA2-400.2RC 2-channel amp

• Class D design
• 200 watts RMS x 2 at 2 ohms (400 watts peak)
• frequency response: 20-20,000 Hz
• low-pass crossover and bass boost
• conformal-coated circuit board — suitable for power sports and marine applications
• warranty: 1 year

MB Quart NA2-400.1 mono subwoofer amp

• Class D design
• frequency response: 10-300 Hz
• power specs: 200 watts x 1 at 4 ohms (400 watts x 1 at 2 ohms)
• electronic crossover
• warranty: 1 year
• MFR # MBQR-STG5-2

What's in the box:

• This package contains 7 individually boxed items:
• GMR-LED&RZR Dash Kit:
• Marine digital media receiver w/ inline 10A & 1A fuses
• Wiring harness
• Mounting bracket (pre-installed on radio)
• 2 Threaded studs/posts (pre-installed)
• 4 Nuts (pre-installed)
• 2 Lock-washers (pre-installed)
• 2 Front-covers (pre-installed)
• 2 Nuts
• Operator's Guide
• QR Code for Installation Instructions

NA2-400.2RC Amplifier:

• 2-Channel amplifier w/ attached 8" power/ground and speaker output harnesses (terminated with Molex plugs)
• 16" Power/ground harness (inline 30A ATC fuse)
• 16" Speaker output harness
• Four 18mm screws
• Quickstart guide

NA2-400.1 Amplifier:

• Mono amplifier (attached 7" 3-pin & 2-pin harnesses)
• 16" Power/ground harness (inline 30A ATC fuse)
• 16" 2-Pin speaker harness
• Four 3/4" screws
• 4 Flat-washers
• 4 Lock-washers
• Remote level control (attached 15.5' cable w/ Molex connector)
• Amplifier installation guide

MQBR-POD-2:

• 2 Speaker pods pre-loaded with NH1-120B 8" drivers (attached 11" wire harness)
• Four 18mm bolts
• Two 24mm T40 Torx screws
• 4 Flat-washers
• QR Code for installation instructions

NHT1-120BPR:

• 2 Speaker enclosures pre-loaded with NHT1-120PB 8" drivers (attached upper mounting clamp and 7" bare-ended speaker wire)
• 2 Large lower clamps
• 2 Small lower clamps
• 2 Large rubber spacers
• 2 Small rubber spacers
• Eight 25mm hex-socket bolts
• 4 Crimp connectors
• 2 MB Quart adhesive logos

MBQR-SUB-2:

• Loaded 10" subwoofer enclosure w/ attached 20" wire harness
• 2 Mounting plates
• 2-1/4" Metal support tab
• Eight 3/4" bolts
• 8 Lock-washers

MBQR-ACC-1:

• Single amp mounting plate
• Dual amp mounting plate
• 3' Power harness (inline 50A Maxi fuse)
• 80" Speaker output splitter harness
• 9' Right rear speaker harness
• 9' Left rear speaker harness
• 32" 4-Seat extension harness
• 6-Pin Radio power adapter harness
• Two 2' stereo RCA cables
• Two 4" LED jumper/splitters
• Ten 7" wire ties
• Eight 12mm screws
• 8 Flat-washers
• 8 Nylock nuts