Car remote start System for 2014-2020 Fits NISSAN ROGUE PUSH-TO-START AUTOMATIC

** THE VEHICLE LISTED REQUIRES KLON PROGRAMMING FOR THIS UNIT TO WORK! **

You will need the ADS-USB Cable in order to complete the KLON programming processes which can be purchased here: BUY REQUIRED ADS-USB Cable

How the KLON Process works:
1. We will pre-programmed your unit to your vehicle.
2. During the installation process (as per your installation guide) you will have to connect the unit to your PC via the ADS-USB Cable.
3. Once connected you will visit idatalink.com using the Internet Explorer browser.
4. You create a free account.
5. You will be prompted to install a small extension.
6. Once you install the extension and refresh the page, the website will detect your unit and may ask you for your vehicle information to complete the programming process and install the correct firmware on to your unit.

Car remote start System for 2014-2020 Fits NISSAN ROGUE PUSH-TO-START AUTOMATIC

iDatastart ADS-THR-NI3

Remote start T-harness for select 2013-up Nissan and Infiniti vehicles 

Vehicle-specific T-harness for an iDatastart remote starter

iDatastart's ADS-THR-NI3 T-harness connects their iDatastart CMHCXA0 HC remote start module to your select Nissan-built vehicle. This T-harness plugs into your vehicle's electrical databus system, allowing you to start and stop the engine remotely, and control some basic factory security functions as well. Some wiring may be required — one to four connections, typically. You can identify your vehicle in our fit guide to see if this harness is compatible.

What's in the box:

23" Main T-harness

43" 5-Pin harness

33" 2-Pin harness

29" One-wire harness

Two 8" optional terminal wires (pinned for Molex plug)

Four 6" individual wires (pinned for Molex connector)

MFR #ADS-THR-NI3

FT-DC3-LC Remote Start System

No Wiring comes with this system as you MUST must purchase either a T-Harness Solution or the low current or high current harnesses which are sold seperately

Universal remote start solution designed for high and low-current draw vehicles. Enables (3XLOCK) remote start from the factory key fob. Supports CompuStar RF kits and DroneMobile telematics for additional range. Compatible with iDataStart t-harnesses sold separately for seamless, 'plug & play' installation. NO KEY REQUIRED for immobilizer bypass on most vehicles.

We can eliminate the hassle of programming your remote start, as we provide free flashing after the purchase of each unit!

To save yourself the trouble, please contact us by sending us the following vehicle specifics to our e-mail:

Vehicle Make (ex. Ford), Year (2014), Vehicle Model (F-150)

Ignition Type (Push-to-Start or Key-Start)

Engine Type (4, 6, 8, etc. cylinder)

Key Fob (Factory or Aftermarket).

We won't be able to offer the free programming of your remote start without this information, so be sure to send it at your earliest convenience to ensure fast shipping!